免费发布信息
Reference cable. Automated use is supported by the 816x Plug&Play Driver, which also supports use of the module for advanced swept-wavelength RL measurements.寻找更多货源请登录:www.wl95.com或拨打电话0755-86016691。...
Reference conditions: ±2.5% (at 1310nm calibrallon point). Total accuracy: ±5% (1000 to 1650 nm). Linearity: ±0.05 dB (1000 to 1650 nm, -70 to+10dBm). Noise CW light: 93dBm or less. Noise Chopped light: 93dBm or less寻找更多货源请登录:www.wl95.com或拨打电话0755-86016691。...
Reference Wavelenght Light Source * Option 06: Monitor Output (VGA Output) * Option 13: Wavelenght Reference & SLD Light Source ...
Reference for automatic calibration and zeroingDuty cycle entry for a convenient peak power representation of the measurement average powerTen preloaded sensor card factors versus frequencyFrequency Range: 100 kHz to 110 GHz寻找更多货源请登录:www.wl95.com或拨打电话0755-86016691。...
Reference (GCR) signals. All operating modes and insertion programs may be easily set up from the front panel and saved in nonvolatile memory storage. A full field test signal output with signal selection independent from the VITS program is provided. 寻找更多货源请登录:www.wl95.com或拨打电话0755-86016...
Reference 1 × 10–7/year with R&S®FSW-B4 option 3 × 10–8/yearBandwidthsResolution bandwidths standard filter 1 Hz to 10 MHz, 80 MHz (with R&S®FSW-B8 option) ...
Reference Wavelenght Light Source Specs at a glance for the MS9710Cwith option 05 - Wavelength Range: 600 to 1750 nm- Dynamic Range: 62 dB (1 nm from peak wavelength)- Wavelength Accuracy: ?300 pm (600 to 1750nm)- Wavelength Linearity: ?20 pm (1530 to 1570 nm)- Polarization Dependency: ?0.05 dB (155...
Reference receivers for 155, 622, 1063, 1250, 2488, and 9953 Mbit/s SDH/SONET, Fibre Channel, or Gbit Ethernet transmitter test. Electrical channels have up to 50 GHz bandwidths. TDR and TDT modules are available for optimization of circuit board transmission lines. Data acquisition and measurement analysis a...
Reference oscillator as standardHigh level repeatabilityRemote control via GPIB and LAN寻找更多货源请登录:www.wl95.com或拨打电话0755-86016691。...
Reference inputRMS抖动 <100 ps （10−8 × delay）触发延时（typ.） 85 ns （ext. trigger to T0 output）外部触发比率 DC to 1/（1 μs longest delay）幅值 ±2.56 VDC分辨率 10 mV斜率 Trigger on rising or falling edge阻抗 1 MΩ 40 pF or 50 Ω内置比率发生器比率 Single shot, 0.001 Hz to 1.000 MHz, or line分辨...
|