OP8000 是将光学测量，数据传输和通讯测试集成到一个单平台的测试系统，无需外部PC便可运行自动化软件议，可对系统和器件进行全面有效的测试，加速设置和实际测试进度。
OP8000集成测试系统采用Windows的开放式架构和以太网连接，可提供远程控制功能，实现测试自动化，最大程度地减少了手动调整时间，且确保结果的准确性。
测试系统集成了四个可选型模块：
1 可调谐激光光源。波长精度高，调谐速度快，可实现波长快速、连续扫描功能。
2 PDL 控制器。主要用于光学器件的偏振相关损耗测量，自动快速调节产生相关波长的所有偏振态，并且光插入损耗变化极小。
3 快速多通道功率计。用户可订制1 – 48通道，每一个功率计通道都可以进行独立操作。
4 多路光开关模块。主要作用是控制光路和切换光路。
性 能 指 标 SPECIFICATIONS
OP100 可调谐激光光源 Tunable Laser Source | |||||||
参数项 Parameters | C band | L band | C+L band | ||||
波长范围 Wavelength Range | 1525.00 to 1568.00 nm | 1568.00 to 1610.00 nm | 1525.00 to 1610.00 nm | ||||
输出功率 Output Power | >= 13dBm | >= 10dBm | >= 7dBm | ||||
波长分辨率 Wavelength Resolution | 1.0 pm | ||||||
波长绝对精度 Absolute Wavelength Accuracy | +/- 10 pm, typ. < 5 pm | ||||||
波长相对精度 Relative Wavelength Accuracy | +/- 5 pm, Typ. +/- 2 pm | ||||||
波长重复性 Wavelength Repeatability | +/- 2 pm, typ. +/- 1 pm | ||||||
波长稳定性 Wavelength Stability | <= +/- 2 pm | ||||||
调谐速度 Tuning Speed | <= 2 ms per step | ||||||
功率稳定性 Power Stability | +/- 0.05 dB, 1h. Typ., +/- 0.1 dB, 24h. | ||||||
功率重复性 Power Repeatability | +/- 0.05 dB | ||||||
功率线性度 Power Linearity | +/- 0.3 dB | ||||||
功率波长平整度 Power Flatness Versus Wavelength | 0.3 dB typ., 0.5 dB max. | ||||||
边模抑制比 Side-mode Suppression Ratio | >= 45 dB | ||||||
相对噪声强度 Relative Intensity Noise | < -135 dB | ||||||
光接口类型 Optical Interface Type | FC/PC | ||||||
OP200 多通道功率计 Multi-channel Power Meter | 1 | 2 | 3 | 4 | |||
探测器类型sensor Element | InGaAs | ||||||
通道数量Number Of Channels | 1 – 48 (specified on order) | ||||||
工作波长范围Working Wavelength Range | 850 ~ 1700 nm | ||||||
功率测量范围Power Measurement Range | + 3 ~ -85 dBm | +23 ~ -65 dBm | |||||
采样速率Sampling rate | 10K | 1M | 10K | 1M | |||
绝对功率精度Absolute Power Accuracy | +/- 4% (1200 nm ~ 1610 nm) | ||||||
相对精功率度Relative Power Accuracy | < 0.02 dB Typ. | ||||||
功率线性度Power Linearity | <= +/- 0.06 dB (1200 nm ~ 1610 nm, + 0~ -60 dBm) | ||||||
回损return Loss | > 45 dB | ||||||
校准周期recalibration Period | 2 years | ||||||
光接口类型Optical Interface Type | FC/PC | ||||||
OP300/1 偏振相关损耗控制器 PDL Controller | |||||||
插入插损 Insertion Loss | < 0.05 dB | ||||||
工作波长 Working Wavelength | 1550 ±50nm | ||||||
内部偏振损耗 Internal Polarization Loss | < 0.05 dB, typ., 0.01 dB | ||||||
扰偏频率 Polarization Scrambling Frequency | > 700 kHz | ||||||
光接口类型 Optical Interface Type | FC/APC | ||||||
OP300/2 偏振相关损耗控制器 PDL Controller | |||||||
工作原理 Principle | 4个电动式光纤环 4 Motorized Fiber Knob Loop | ||||||
波长范围 Wavelength Range | 1200 ~ 1700 nm | ||||||
插入损耗 Insertion Loss | < 1.0 dB | ||||||
消光损耗 Extinction Loss | 40 dB | ||||||
偏振相关损耗 PDL | < 0.008 dB | ||||||
光接口类型 Optical Connector | FC/PC | ||||||
OP900光开关模块optical Switch |
| ||||||
通道数量 Optical Channel | 2 /4/8 optional | ||||||
插入损耗Insertion Loss | <= 2.5 dB | ||||||
工作波长Operating Wavelength | 1200 ~ 1650 nm | ||||||
回波损耗Return Loss | >= 50dB | ||||||
通道串扰Interchannel Crosstalk | >= 55 dB | ||||||
偏振相关损耗Polarization Dependent Loss | <= 0.1 dB | ||||||
波长相关损耗Wavelength Dependent Loss | <= 0.3 dB | ||||||
温度相关损耗Temperature Dependent Loss | <= 0.3 dB | ||||||
重复性Repeatability | <= ±0.02 dB | ||||||
使用寿命Durability | 107 cycles | ||||||
传输光功率Transmission Power | <= 500 mW | ||||||
切换时间Switching Time | <= 4 ms（adjacent channel switching） | ||||||
OP8000 主机性能 System |
| ||||||
操作系统 Operation System | Windows XP/Windows 7 embedded | ||||||
CPU | Dual-core processor CPU 2.9GHz external frequency: 100MHz error correction bus type: DMI bus, 5.0GT/s | ||||||
光纤类型Application Fiber Type | Standard SM and MM up to 62.5 um core size | ||||||
显示屏 Display | 5”, 640x380 color | ||||||
存储设备 Storage | 500G hard disk | ||||||
供电电源 Power Supply | AC 100 to 240 V, 50/60 Hz | ||||||
接口 Interfaces | USB port, Serial RS232, Ethernet interface, External keyboard/mouse | ||||||
工作温度 Operating Temperature | 0℃ to 45℃ | ||||||
储存温度Storage Temperature | -10℃ to 80℃ | ||||||
外形尺寸 Dimension | 430 mm W, 132 mm H, 134 mm D | ||||||
|