供应藤仓(Fujikura) FSM-60S光纤熔接机 - 深圳市光比纳通信有限公司

Fujikura FSM-60S Fusion Splicer Features:
● Rugged construction providing shock, dust and moisture resistance
● Dual monitor position with automatic image orientation
● Automatic arc calibration and fi ber identifi cation
● User-selectable fi ber clamping method - sheath clamp or fi ber holders
● Auto-start tube heater feature
● Color LCD display with anti-refl ective coating for excellent visibility in bright sunlight
● Simultaneous battery charge and splicer operation Fonsun Technology
● Long life battery (up to 160 splice/heat cycles per charge)
● Detachable work table incorporated into the transit case
● Data and video download software included; software upgrade available via the internet
● Green friendly-RoHS & WEEE

compliant Specifications: Applicable Fibers: SM(ITU-T G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655) and other single mode fiber including ITU-T G.657 fiber Fiber count: Single Applicable fiber dimensions Cladding Diameter: 80μm to150μm Coating Diameter:100μm to 1,000μm Fiber setting and cleaved length Sheathe clamp A (standard) : For coating dia. up to 250um (8 to 16mm cleave), coating dia. Of over 250um (16um cleaver) Sheathe clamp B (option) :For coating dia. up to 1000um (8 to 16mm cleave) Sheathe clamp C (option) :For 900um dia. Loose tube fiber (8 to 16mm cleave) Fiber holder (option) :FH-60-250 and FH-60-900 (10mm cleaver) Splicing Modes: 100 preset and user programmable modes Typical Average Splice Loss: 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS (Measured by cut-back method relevant to ITU-T and IEC standards) Return loss: ＞＞60dB Splicing Time:Typical 9 sec. with SM FAST, 10sec. with SM AUTO and 13sec with AUTO modes with standard SM (ITU-T G.652) Splice Loss: Estimate Available Attenuation splicer function Intentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an in-line fixed attenuator Tube heater / Heating Time: Built-in tube heater with 30 heating modes.Typical 30 seconds with FP-03 sleeve, Applicable Protection Sleeve: 60mm, 40mm and Fujikura FPS01 series. Storage of Splice Result: The last 2000 results to be stored in the internal memory Tension Test: 1.96 to 2.25N Operating Condition: 0 to 5,000m above sea level, 0 to 95%RH and -10 to 50 degC and up to 15m/s wind velocity, respectively Storage Condition: 0 to 95%RH and -40 to 80 degC respectively. Battery:-20 to 30 degC for long term Dimensions: 136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches) Weight: 2.3 kg (5.1 lbs) with AC adapter ADC-13; 2.7kg with BTR-08 Viewing Method: Two CMOS cameras and 4.1 inch TFT color LCD monitor Fiber view and Magnification 300X for single X or Y view, or 187X for X and Y view Power Supply: Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery No.of Splice Cycles with battery: Typical 160 cycles (splice / tube heat) with BTR-08 Electrode life: 2500 arc-discharges Terminals: USB 1.1 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for HJS-02/03 or SH-8 power supply

TEL：+86-755-26734241
QQ：358349449
Mobil：13510097005 张先生
MSN：victorzhang1979@hotmail.com