免费发布信息
四川光发科技的WDM是基于TFF（薄膜滤波器）的波分复用技术。 它有各种封装尺寸和波长选择; 它将不同波长的光信号多路复用到单根光纤进行传输，接收端利用多路分解将光纤中的信号分解成不同波长的信号。 Features：Low Insertion LossHigh Return LossHigh Channel IsolationEpoxy-Free Optical PathSuperb Thermal StabilityRoHS...
OLTage (V)5Power Handling (mW)500Durability (Cycles)10 Million Operating Temperature (°C)0 ~ +70Storage Temperature (°C)-40 ~ +85 Electrical Pin Configuration:Electronic pins structure: Non-latching Optical path Condition PIN1PIN10PIN3-2PIN3-4PIN8-9PIN8-7 1-4;2-3N/AN/ACLOSEOPENCLOSEOPEN1-3;2...
OLTage = VCC)0(VOLTage = GND)IN1↔OUT 1; IN2 ↔ OUT 2State “1”0(VOLTage = GND)1(VOLTage = VCC)IN1 ↔OUT 2; IN2 ↔OUT 1 电控参数ParameterSpecificationUnitRegularUltra-fastSwitching Speed200~40010~30μsSwitching VOLTage(VCC)5 (+/-5%)6.0~7.0VSwitching Current< 200< 50...
OLTageV5.0 V DC Power ConsumptionW1.25 Control interfaceUSB and RS232 Operation Temperature°C152045 Storage Temperature°C-4080 Size (WxHxL) (8x8 up to20x20)mm130x95x40 Size (wxlxh) (24x24 up to40x40)mm130x190x40 1 without connectors...
Features Active diameter 75μm Small dark current High reliabilityApplications 射频光传输Absolute maximum ratingsParameterSymbolConditionRatingsUnitStorage temperatureTstg--40~+100°COperating temperatureTop--40~+85°CReverse vOLTageVRCW30VSoldering time--10sSoldering Temp--260°COptical ...
OLTage = VCC)0(VOLTage = GND)IN1↔OUT 1; IN2 ↔ OUT 2State “1”0(VOLTage = GND)1(VOLTage = VCC)IN1 ↔OUT 2; IN2 ↔OUT 1 电控参数参量规格Unit低速高速切换时间200~40010~30μs开关电压(VCC)5 (+/-5%)6.0~7.0V开关电流< 200< 500mA脉冲宽度(typical)100020μs频率< 800< 30...
OLTage(VCC)5 (+/-5%)6.0~7.0VSwitching Current< 200< 500mAPulse Width(typical)100020μsClaim Frequency< 800< 3000Hz Pin control signal corresponding to switching status table开关状态Pin1Pin2The Optical Output Port State “0”1(VOLTage = VCC)0(VOLTage = GND)IN1 ...
OLT SFP等光模块接入，仅需要光模块的接收端，将光信号转换为电信号，CDR再将电信号的时钟提取出来并输出，时钟信号主要用于示波器的触发信号。 技术指标 编号 技 术 指 标 最大值 最小值 单位 1 数据率范围 11.3 0...
OLTage 0-2.5V，分辨率 ≤1mV 扫描模式Scan pattern 扫描电流输出或直流电流输出 校正功能Correcting feature 用户可自行校准功率、电流、电压、背光 测试时间Testing time < 2 s 传输接口Transmission interfa...
OLT SFP等光模块接入，仅需要光模块的接收端，将光信号转换为电信号，CDR再将电信号的时钟提取出来并输出，时钟信号主要用于示波器的触发信号。 技术指标 编号 技 术 指 标 最大值 最小值 单位 1 数据率范围 11.3 0...
|