Eoptolink XFP transceiver is a high performance, cost effective modulse for serial optical data communications applications specified for signal rates of 9.95 Gb/s to 11.3 Gb/s. It is fully compliant to XFP MSA Rev 4.5. The modules are designed for single mode fiber and operates at a nominal wavelength of 850/1310/1550 nm, XFP SR, SFP LR, XFP ER and XFP ZR. The transmitter section incorporates uncooled directly modulated 1310 nm distributed feedback laser (DFB) or EML colled laser 1550nm. The receiver section uses PIN photodetector for low dark current and excellent responsivity or APD high sensetivity receiver.
Features:
· Supports 9.95Gb/s to 11.3Gb/s bit rates
· IEC 60825-1 Class 1/CDRH Class 1 laser eye safety.
· Hot-pluggable XFP footprint
· Maximum link length of 80km
· DFB or Temperature-stabilized EML Transmitter
· XFI Loopback Mode
· Duplex LC connector
· Low Power dissipation
· Superior Thermal and EMI integrity performance to support high port densities
· LC Duplex optical connector interface conforming to ANSI TIA/EIA604-10 (FOCIS 10)
· Built-in digital diagnostic functions, DDMI
· Temperature range -5C to 70C or Indutrial Temperature range on request
· RoHS-6, CE, FDA, FCC, TUV, UL certifactes
Application:
· SONET OC-192 / SDH STM-64
· ITU-T G.709
· 10GBASE-SR/LR/ER/EW/ZR
· 10GBASE-SR/LR/ER/EW/ZR+ FEC
· 10/40/80 km 10G Fibre Channel
· 10/40/80 km 10G Fibre Channel + FEC
Ordering information:
Package | Part No. | Fiber Type | Data Rate Range | Wavelength | Optical Components | Distance Range | Case Temperature range | Application |
XFP | MMF | 9.95~10.3G | 850nm | VSCEL/PIN | <300m | 0~70 | Ethernet,10GFC | |
XFP | MMF | 9.95~11.1G | 850nm | VSCEL/PIN | <300m | -40~85 | Ethernet,10GFC | |
XFP | EOLX-1396-2M | MMF | 9.95~11.1G | 1310nm | FP/PIN | <220m | 0~70 | Eth,SDH,10GFC |
XFP | SMF | 9.95~11.1G | 1310nm | FP/PIN | 2km | 0~70 | Eth,SDH,10GFC | |
XFP | SMF | 9.95~11.1G | 1310nm | DFB/PIN | 10km | 0~70 | Eth,SDH,10GFC | |
XFP | SMF | 9.95~11.1G | 1310nm | DFB/PIN | 10km | -40~85 | Eth,SDH,10GFC | |
XFP | SMF | 9.95~11.1G | 1310nm | DFB/PIN | 20km | 0~70 | Eth,SDH,10GFC | |
XFP | SMF | 9.95~11.1G | 1310nm | DFB/PIN | 20km | -40~85 | Eth,SDH,10GFC | |
XFP | SMF | 9.95~11.1G | 1310nm | DFB/PIN | 40km | 0~70 | ||
XFP | SMF | 9.95~11.1G | 1310nm | DFB/PIN | 40km | -40~85 | ||
XFP | SMF | 9.95~11.1G | 1310nm | DFB/PIN | 70km | 0~70 | ||
XFP | SMF | 9.95~11.1G | 1310nm | DFB/PIN | 70km | -40~85 | ||
XFP | SMF | 9.95~11.1G | 1550nm | EML/PIN | 40km | 0~70 | Eth,SDH,10GFC | |
XFP | SMF | 9.95~11.1G | 1550nm | EML/PIN | 40km | -40~85 | Eth,SDH,10GFC | |
XFP | SMF | 9.95~11.1G | 1550nm | EML/APD | 80km | 0~70 | Eth,SDH,10GFC | |
XFP | SMF | 9.95~11.1G | 1550nm | EML/APD | 80km | -40~85 | Eth,SDH,10GFC | |
XFP | SMF | 9.95~11.1G | 1550nm | EML/APC | 100km | 0~70 | Eth,SDH,10GFC |
XFP modules are hot-swappable and protocol-independent. They typically operate at near-infrared wavelengths (colors) of 850 nm, 1310 nm or 1550 nm. Principal applications include 10 Gigabit Ethernet, 10 Gbit/s Fibre Channel, synchronous optical networking (SONET) at OC-192 rates, synchronous optical networking STM-64, 10 Gbit/s Optical Transport Network (OTN) OTU-2, and parallel optics links. They can operate over a single wavelength or use dense wavelength-division multiplexing techniques. They include digital diagnostics that provide management
that were added to the SFF-8472 standard. XFP modules use an LC
fiber connector type to achieve high density, XFP were introduced after XENPAK and X2 modules.
Depth | XENPAK | XPAK | X2 | XFP |
Power (W) | 6 | 4 | 4 | 1.5, 2.5, 3.5 |
Width (mm) | 36 | 36 | 36 | 18.35 |
Length (mm) | 121 | 85.4 | 91 | 71 |
Depth | 115.2 | 75.7 | 77.2 | 61.7 |
"SFF-8472 Specification for Diagnostic Monitoring Interface for Optical Transceivers Rev 11.0". Small Form Factor Committee. September 14, 2010. Retrieved June 16, 2011.
"INF-8077i: 10 Gigabit Small Form Factor Pluggable Module". Small Form Factor Committee. August 31, 2005. Retrieved June 16, 2011.
"About the 10 Gigabit Small Form Factor Pluggable (XFP) Multi Source Agreement (MSA) Group". 2009. Archived from the original on May 1, 2009. Retrieved June 16, 2011.
INF-8074i Specification for SFP (Small Formfactor Pluggable) Transceiver (pdf), SFF Committee, May 12, 2001, p. 6
XFP modules are hot-swappable and protocol-independent. They typically operate at near-infrared wavelengths (colors) of 850 nm, 1310 nm or 1550 nm. Principal applications include 10 Gigabit Ethernet, 10 Gbit/s Fibre Channel, synchronous optical networking (SONET) at OC-192 rates, synchronous optical networking STM-64, 10 Gbit/s Optical Transport Network (OTN) OTU-2, and parallel optics links. They can operate over a single wavelength or use dense wavelength-division multiplexing techniques. They include digital diagnostics that provide management
that were added to the SFF-8472 standard. XFP modules use an LC
fiber connector type to achieve high density, XFP were introduced after XENPAK and X2 modules.
Depth | XENPAK | XPAK | X2 | XFP |
Power (W) | 6 | 4 | 4 | 1.5, 2.5, 3.5 |
Width (mm) | 36 | 36 | 36 | 18.35 |
Length (mm) | 121 | 85.4 | 91 | 71 |
Depth | 115.2 | 75.7 | 77.2 | 61.7 |
"SFF-8472 Specification for Diagnostic Monitoring Interface for Optical Transceivers Rev 11.0". Small Form Factor Committee. September 14, 2010. Retrieved June 16, 2011.
"INF-8077i: 10 Gigabit Small Form Factor Pluggable Module". Small Form Factor Committee. August 31, 2005. Retrieved June 16, 2011.
"About the 10 Gigabit Small Form Factor Pluggable (XFP) Multi Source Agreement (MSA) Group". 2009. Archived from the original on May 1, 2009. Retrieved June 16, 2011.
INF-8074i Specification for SFP (Small Formfactor Pluggable) Transceiver (pdf), SFF Committee, May 12, 2001, p. 6
Parameter | Symbol | Min | Typ | Max | Unit |
Transmitter | |||||
Optical Output Power, 2km @1310nm | PO | -5.2 | 0 | dBm | |
Optical Output Power, 10km @1310nm | PO | -6 | 0 | dBm | |
Optical Output Power, 20km @1310nm | PO | -3 | 1 | dBm | |
Optical Output Power, 40km @1550nm | PO | 0 | 4 | dBm | |
Optical Output Power, 80km @1550nm | PO | 0 | 4 | dBm | |
Receiver | |||||
Receiver Sensitivity @ 10.7Gb/s, 2km | Pmin | -14 | dBm | ||
Receiver Sensitivity @ 10.7Gb/s, 10km | Pmin | -15 | dBm | ||
Receiver Sensitivity @ 10.7Gb/s, 20km | Pmin | -15 | dBm | ||
Receiver Sensitivity @ 10.7Gb/s, 40km | Pmin | -16 | dBm | ||
Receiver Sensitivity @ 10.7Gb/s, 80km | Pmin | -24 | dBm |
XFP test board
****
cis AT eoptolink.c om
eoptolink AT gmail.c om
3w.sfp-xfp.c om
SKYPE ID: eoptolink-sfp
Tel: +86-28-67 087 999
Direct: +86 15 601 668 099
Eoptolink Technology Inc. Ltd.
Add: No.127 West Wulian Street, Gongxing Town, Shuangliu County, Chengdu City.