| 技術參數(Specification table) | |||||||
| 型 号（model) | HHT-80 | HHT-150 | HHT-225 | HHT-408 | HHT-800 | HHT-1000 | |
| 內部尺寸（W×H×D）mm (Internal Dim) | 400×500×400 | 500×600×500 | 500×750×600 | 600×850×800 | 1000×1000×800 | 1000×1000×1000 | |
| 外部尺寸（W×H×D）mm (External Dim) | 600×1400×1100 | 700×1500×1200 | 700×1650×1300 | 800×1750×1500 | 1200×1900×1500 | 1200×1900×1700 | |
| 容积/升(Capacity /L) | 80 | 150 | 225 | 408 | 800 | 1000 | |
| 温度范围 Temperature Range | 0℃；-20℃；-40℃；-60℃；-70℃~100℃（+150℃） | ||||||
| 湿度范围 Humidity Range | 20%~98%RH （可根据客户要求定做/or according to the customer's requirement） | ||||||
| 升温速率（空载） Temperature Rising Rate | RT~100℃约30min | RT~100℃约30min | RT~100℃约30min | RT~100℃约30min | RT~100℃约30min | RT~100℃约30min | |
| 降温速率（空载） Temperature falling Rate | 20℃~0℃约20min | 20℃~-20℃约40min | 20℃~-40℃约60min | 20℃~-70℃约90min | |||
| 温度分布均匀度 Temperature uniformity℃ | ±2℃ | ||||||
| 湿度分布均匀度 Humidity uniformity℃ | ±3% | ||||||
| 温度波动度 Temperature fluctuation℃ | ±0.3℃ | ||||||
| 湿度波动度 Humidity fluctuation℃ | ±2.5℃ | ||||||
| 内部材质 Internal material | SUS-304#不锈钢( SUS304# ) | ||||||
| 外部材质 External material | 高级耐磨烤漆涂装（或SUS-304#不锈钢）( SUS304# ) | ||||||
| 冷冻系统 Cooling system | 单段式，复迭式压缩机。( Single or dual cooling ) | ||||||
| 冷却方式 Cooling mode | 风冷式/水冷式( Air cooling ro water cooling ) | ||||||
| 保温材质 Insulation material | 岩棉及硬质PU发泡保温( Fine glass fibre and polyurethane foam ) | ||||||
| 加湿系统 Humidification system | 表面蒸发式( Surface evaporating system ) | ||||||
| 供水系统 water supply | 内置型自动水回收循环装置(Automatic water regulating and recoverable supply system) | ||||||
| 保护装置 Protector | 电路系统负载保护，压缩机负载保护，控制系统负载保护，加湿系统负载保护，故障指示灯 Overheating prevention circuit-reaker,compressor overload protection ,control system overload perevention ,humidity system overheating,drying out prevention ,breakdown indicator light | ||||||
| 温湿度调节Temperature regulation mode | 平衡调温调湿方式（unique balanced regulation） | ||||||
| 加热系统 Heheater | 不锈钢散热式加热器 （SUS304# stainless steel heater） | ||||||
| 除湿系统 Dehumidification system | 冷冻潜热除湿方式/( dehumiditying method ） | ||||||
| 电源 Power | AC220V/380v ±10%，1PH,50/60HZ | ||||||
| 标准配置 Standard configuration | 多层强化玻璃窗口、标准测试孔一个，可调式隔层架两块，箱内照明，移动轮一组 vacuum glass inspection window.cable Port.control status indcator lights chamber lamp experiment separation shelves. | ||||||
| 符合标准 | GB,ISO,ASTM,UL CEN------ | ||||||
|